Search results for " reforming"
showing 10 items of 12 documents
Researches on the Alternative Fuels Which Can Be Used to Motors
2010
The alternative fuels are substances or materials used as fuel, other than the old conventional fuels (oil, natural gases and coals). 
 The paper analyses the most important alternative fuels, such as: bio-diesel, alcohols and hydrogen, presenting at each category the main important characteristics, the advantages and disadvantages presented by them. 
 The methyl-ester which is known as bio-diesel can be used in all motors with ignition by compression, alone or mixed in any proportion with oil, with minor modifications at the injection system. Bio-diesel fuel assures the same motor power as oil does, having even a bigger cetanic number than the usual oil. After tests, it was obser…
Screening of ceria-based catalysts for internal methane reforming in low temperature SOFC
2010
Gaudillere, Cyril Vernoux, Philippe Mirodatos, Claude Caboche, Gilles Farrusseng, David 6th World Congress on Oxidation Catalysis (6WCOC) JUL 05-10, 2009 Lille, FRANCE; International audience; Ceria-based catalysts have been assessed for internal methane reforming at low temperature (400-600 C) in Solid Oxide Fuel Cell (SOFC) A combinatorial library of 15 metal (Cu Pt Ni) supported ceria was prepared using wet impregnation method The ceria-based oxides are undoped or doped with metal transition (Zr) or by rare earth (Gd or Pr) The effect of the metal the dopant and the surface area on the catalytic performances was investigated in high-throughput manner using a 16-parallel reactor The catal…
Methanol fuel processor and PEM fuel cell modeling for mobile application
2010
International audience; The use of hydrocarbon fed fuel cell systems including a fuel processor can be an entry market for this emerging technology avoiding the problem of hydrogen infrastructure. This article presents a 1 kW low temperature PEM fuel cell system with fuel processor, the system is fueled by a mixture of methanol and water that is converted into hydrogen rich gas using a steam reformer. A complete system model including a fluidic fuel processor model containing evaporation, steam reformer, hydrogen filter, combustion, as well as a multi-domain fuel cell model is introduced. Experiments are performed with an IDATECH FCS1200™ fuel cell system. The results of modeling and experi…
Valorization of alginate for the production of hydrogen via catalytic aqueous phase reforming
2018
Abstract Alginate, a carbohydrate abundant in the outer cell wall of macroalgae, was subjected to catalytic aqueous phase reforming (APR) to produce hydrogen using a 3% Pt/C commercial catalyst. The performance of the process was evaluated according to the conversion of the carbon to gas, the hydrogen yield and the hydrogen selectivity. The catalyst and feed amount, temperature, reaction time, pH and the presence of H2 were modified to understand the dependence of the outcome of the process on these parameters. The presence of the catalyst was fundamental in order to increase the hydrogen yield compared to the uncatalyzed reaction, and it can be reused without activity loss. In addition, it…
Ni-Based Catalysts for Low Temperature Methane Steam Reforming: Recent Results on Ni-Au and Comparison with Other Bi-Metallic Systems
2013
Steam reforming of light hydrocarbons provides a promising method for hydrogen production. Ni-based catalysts are so far the best and the most commonly used catalysts for steam reforming because of their acceptably high activity and significantly lower cost in comparison with alternative precious metal-based catalysts. However, nickel catalysts are susceptible to deactivation from the deposition of carbon, even when operating at steam-to-carbon ratios predicted to be thermodynamically outside of the carbon-forming regime. Reactivity and deactivation by carbon formation can be tuned by modifying Ni surfaces with a second metal, such as Au through alloy formation. In the present review, we su…
Photocatalytic solar light H2 production by aqueous glucose reforming
2018
A series of tungsten and nitrogen doped Pt-TiO2 samples were prepared with the aim to extend the TiO2 absorption to the visible light region and to enhance the separation efficiency of the photogenerated electron/hole pairs. The physicochemical features of the powders were characterized by Xray diffraction (XRD), UV/Vis reflectance spectra, specific surface area (SSA) determinations, and transmission electron microscopy (TEM) analyses. The influence of the presence of different doping agents was evaluated, under anaerobic conditions, in the aqueous photo-reforming of glucose to form H2 at ambient pressure and temperature under a halogen lamp or natural solar light irradiation. Arabinose, er…
Study of the synergistic interaction between nickel, gold and molybdenum in novel modified NiO/GDC cermets, possible anode materials for CH4 fueled S…
2013
Abstract The present study concerns the structural and physicochemical characterization of novel Au–Mo–NiO/GDC cermets, alongside with measurements of their carbon tolerance. This is an investigation on whether commercially available NiO/GDC powder that is modified with Au and/or Mo can yield possible electrocatalysts as anodes for CH4 fueled SOFCs. Specifically, the performed preparation methods of deposition-precipitation and deposition-coprecipitation permitted the modification of a commercial electrocatalyst and lead to cermets that exhibit different reaction kinetics for the catalytic dissociation of CH4 and different performance for CH4 steam reforming. The most interesting structural…
Theoretical Investigation of Aqueous Phase Reforming of 1,2 Propanediol over a Pt catalyst
2015
Aqueous Phase Reforming (APR) process is one of the most efficient solution for producing hydrogen from biomass renewable feedstocks, such as polyalcohols. [1] Generally the reaction is catalyzed by supported platinoid metals and among these platinum has been recognized as the most active and selective toward the production of hydrogen. However, due to its really high complexity, the reaction mechanism is today poorly understood. DFT methods can be useful for understanding the APR catalytic mechanism at atomistic level. A detailed mechanistic study was carried out using a Pt30 cluster for the modelization of the catalyst and 1,2 propanediol (1,2PDO) as a model feedstock for the APR. Even fo…
DFT investigation of polyalcohols reforming on palladium cluster
2015
Biomass conversion technologies have recently gained high industrial interest for the production of sustainable fuels and fine chemicals; starting feedstocks for these processes are generally complex mixtures of oxygenated compounds, ranging from lignans, carbohydrates and polyalcohols to carboxylic acids [1]. Framed within this scientific context the entire reforming mechanism of two well-known polyols, namely ethylen glycol (C2) and glycerol (C3), on a small Pd cluster was investigated by means of density functional theory. Among the large amount of reaction pathways that can be followed in the reforming of oxygenates, we discuss here only the route that brings to carbon monoxide and hydr…
Photocatalytic Solar Light H2 Production by Aqueous Glucose Reforming
2018
Photocatalytic Solar Light H2 Production by Aqueous Glucose Reforming